Hey folks!

So, this is my first post on here. I've scoured this site many times over for the project I'm going to FINALLY start here soon. I figured I might as well join up!

Here's what I'm up to...

I bought a drum kit from a guy I played drums with in high school band. He had told me they were a set of blue sparkle "Ludwigs" that he'd sell me for around $50 or so. He said they needed work...and that they were drums that he didn't ever really play. This guy came from a small town in my county that's kinda down and out. His home life was rough and the drums were being sold because he needed the money to help take care of his brother and so on...I felt bad for him and I had some interest in doing a fixer upper kit anyway...

He shows up with the drums in his car...I paid him the $50 and started loading them into the back of my parent's truck.

These were NOT vintage Ludwigs...I repeat...NOT.

The drums were indeed a very old blue sparkle wrap kit. The bottom hoops/heads/tension rods were missing. The bass drum hoop that the kit did have was rotted through. The drums had apparently been sitting somewhere damp and I'm pretty sure that every pack of cigarettes ever smoked had been smoked in front of these drums (the odor while sanding the first time was incredible!).

The drums had these old tarnished round badges that said "Gambles Import Corp" with a large letter "G" wrapped around a globe with a large letter "I" in the center...all of the badges except the one on the bass drum were chewed up and bent. There were 4 drums...a 12x8, 13x9, 16x16, and a 20x14" Bass drum.

Despite my apprehention...I bought them for the fifty bucks...and I figured it could be a fun little restoration project. After all...people restore classic cars...why not drums?

So, after peeling off the rotting blue sparkle wrap...(which crumbled and tore off about like a piece of paper) I stained the shells in what I thought (at that time) to be a nice mahogany stain. I clear-coated them with cheap clear spray paint...I painted the lugs black w/gold specks and threw away everything to do with the tom mounts...as it was rusted through...and then it came time to price all of the parts...and then...

It has been a dead standstill up until about now...the price of everything the kit would need was quite expensive for a kid working at subway while in high school. I couldn't afford everything the kit needed...which was pretty much everything but the shells.

I was able to throw heads on the drums...like...one batter head per drum...and I found ways to mount them and play them a bit...(not the bass drum!) and I do find the tone very low and growly...they have a lot of punch... but again...they've sat on a drum shelf in various garages/basements untouched for nearly the last 8 years.

And now that I'm older...and things are better...I'm planning to restore /modify this Gambles kit. I'm also planning on upgrading some of the kit's systems to a bit more modern design and quality. I basically have a set of MIJ shells to start with. All of the hardware will need to be replaced.

I DO love how they sound. I've watched a TON of videos of similar MIJ drums with good studio headphones and I just have this feeling like there's some really awesome drums sitting in my garage in need of a fix up.

The 13" drum is a lost cause as it has gone out of round and was in the worst shape when I bought them. The drum measures 12.5"inches one way and 13.25 the other...or something like that...it's totally out of round. Also...by not restoring this one I drive the cost of the kit restore down a bit.

I plan to firstly sand the shells down and strip all of the clear coat and stain from the exterior of the shells. The shells of the toms are 3 ply Philippine mahogany and the bass drum is the same type of wood with 4 plies. I'm going to fill all of the old mount holes on the tom, floor tom, and bass drum using hard wood dowels...

In the inside of the drums I want to sand the black (I painted over the gray w/ black) paint off as much as possible and then I'm going to do the first crazy thing...I'm going to add a very thin ply of either Maple or Mahogany to all of the drums. I will finish out the ply and apply a nice matte lacquer finish to the inside. Not 100% on what this will do to the sound...but I know DW is screwing around with maple/mahogany combos...I'm going to do the same with far less quality...but it'll look good.

I plan to re-wrap the drums in all new wraps. Hope to wrap these in black glass glitter from Precision Drum co. out of New York. The drums will then get all new Slingerland reproduction lugs (the same type as the original lugs...the old ones were SO pitted and scuffed) and lug gaskets.

I will replace all tension rods with modern ones and all new chrome triple flanged hoops. New bass drum spurs and the heavy duty threaded vents w/ gaskets will also be added.

The tom mount I'm not going to replace the consolette on the bass drum. I will mount the tom on a snare stand. The floor tom will get all-new brackets and new legs as the old ones were covered in rust.

Of course, new heads will be added and I'm contemplating having the bearing edges re-done or updated. I'm also trying to decide if I want to add re-rings to the inside of the shell...but cost and availability will decide this...

So, that's where I'm at...it's not going to be cheap really...it's going to cost about what 3 of these kits in prime shape would...but I'm going to restore this kit one way or another.

Who knows a lot about Gambles Import Corp. drums? Share anything you know...the info gives me inspiration and ideas! I've read about everything I can find. They seem to be everywhere and yet I can hardly find any information vs their Stewart, Star, and Coronet cousins...

Thanks for listening guys!

I might be crazy!