Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 133.87056%

Slingerland Radio King WMP project kit........

Posts: 5356 Threads: 87
Loading...

I decided to bevel the plug to match and follow the seam. It'll look better that way I think. Ran out of time today but should be able to start knocking down the plugs tomorrow afternoon. Being the inside ply is mahogany I plan to stain the plugs to match the interior a little better. My son wanted to make 2 ply plugs maple/mahogany but he's been busy with his guitar building. And he didn't mention it till after these were glued in. LOL. Laughing H

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#41
Posts: 5356 Threads: 87
Loading...

Had some time this afternoon to start sanding the shell and repair plugs. Still some minor sanding and filler to go but about 80% there. I cut the seam area in best I could. I'm no wood worker but came out ok I think.

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#42
Loading...

Looks great!!!

1960's SONOR 12-16-20-14 blue slate pearl
1968 LUDWIG 12-13-16-22-14Sky blue P
1972 LUDWIG 12-13-16-22-14BlueVistalite
1972 LUDWIG 12-13-16-22-(14 impostor)BlackPanther "SOLD"
1964 Ludwig Oyster Black Pearl 22-12-13-16-14Supra "SOLD"
1969 LUDWIG 12-13-16-22-14 Citrus Mod "SOLD"
1969 LUDWIG Sexto-Plus 8-1 0-12-13-14-15-16-20-20-14 Silver Sparkle
60's Majestic Delux 12-13-16-22-14 red pearl
2009 Homemade Kids 8-10-13-16-12 Orange Sparkle
24 kits, 80 Snares, 65 Cymbals
Don't tell my wife!
Posted on 12 years ago
#43
Posts: 5356 Threads: 87
Loading...

Thanks~!....

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#44
Posts: 5356 Threads: 87
Loading...

I've been talking with my son about a snare for this kit. And maybe making one from scratch. Well he bought me the Acme snare drum kit for Fathers Day!! 8' piece of maple 6" width by 1" thick. Nice grain on this wood and should be able to section it so the grain follows nicely. This one will take some time but have a pretty good plan for it. Gotta love it~!

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#45
Loading...

Looking good, Glenn! The grain of the plugs flows pretty well with the shell.

As far as your new snare, I think you should get an Acme steamer and bend that thing around into a single-ply, solid shell snare. :D

Lynn

I'm no guru, just a vintage drum junkie!

Psalm 150:5
1945 Slingerland RK sparkling gold pearl 26/13/14/16/early 50s 5.5x14 Krupa RK
1967 Slingerland green glass glitter 20/12/14/Hollywood Ace
60s Slingerland 24/13/16/7x14 project
24/13/16/7x14 project RKs
60s 5 & 6.5 Sound Kings
1942 7x14 WMP Krupa RK
1930s Slingerland Universal
1967 Ludwig Hollywood sparkling blue pearl 22/12/13/16
1967 Ludwig Supraphonic 400 & 402
1965 Ludwig Jazz Fest sparkling blue pearl
1923 Ludwig 5x14 NOB
Posted on 12 years ago
#46
Posts: 2713 Threads: 555
Loading...

Very nice job Glenn! Good work on plugging the holes. Great project - I'm enjoying the tread.

Posted on 12 years ago
#47
Loading...

Nice job with the plug work! Might need to get an Acme anvil to hold down that maple plank while you are bending it!

Posted on 12 years ago
#48
Posts: 5356 Threads: 87
Loading...

Thanks guys! Yep I'm going to need a few more Acme things to get this snare done. Excited

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#49
Posts: 5356 Threads: 87
Loading...

For fun I was looking into steam bending different woods. Pretty simple and cheap to make a steam box. I saved one site that had a pretty good one. Also a few good ways to bend the wood with a steel band and clamps on you tube. Some guys muscle it around but one guy used a winch which was pretty cool idea. My son has the router and table for cutting the angled joint edges that go together and bearing edges. Plus a host of saws and sanders. No lathe.....yet~! I know this is a pretty skilled thing to do. But with some time and practice I think I can pull it off. I'm just crazy enough to try it.

http://americanwoodworker.com/blogs/shop/archive/2009/07/09/simple-steam-box.aspx

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#50
  • Share
  • Report
Action Another action Something else here