Sorry man, just now checkin' this. I will get pics this evening. Will even right down some measurements to make sure it wil work for you.

If you are still looking?

Steve

Thanks Steve, yes, I am still interested. Do send some pics and let me know how much you want for it. I'm sure it will work on my 14" floor tom -- there can't be that much difference. For the present I've jerry-rigged a piece of wood 1/4" x 2" x 19" with two holes for the legs to fit into. I just clamp the pedal onto the board and it holds everything fairly steady. But I would prefer a metal bracket for looks and stability. Let me know. -- Don

Here's the bracket. Sorry for the delay. As for how much, make me a offer. I'm sure we can make a deal.

Thanks for the photo, Steve. The bracket looks like it might work. My tom legs are 13.5 inches apart, so please measure the distance from the center of where the legs fit into the brackets and let me know what that measurement is.

Also, how wide is the metal piece at the bottom of the bracket? My pedal needs at least something 3/4 of an inch wide to clamp securely.

Thanks for taking the trouble to answer my questions.

As to price, how about $25. If that isn't enough, let me know.

Thanks,

Don

Just an FYI, here is a pic of one I found that is pretty simple and somewhat adjustable.

KapperDog,

That looks interesting. Could you measure the distance from underside of the piece that attaches to the tom leg to the floor. If it is less than 4" it won't work for my setup. Next question, do you want to sell it, and how much? Thanks for replying.

dono- that one pictured should fit many sizes of drum- the Yamaha one is almost the same in that adjustable design- the Yamaha just has the big bent arms but how it`s adjustable is the same as that there- that one should be Aok for you. Looks nice and light weight as well.

Osaka--Good to hear from you again. You do get around. I like the looks of the adjustable bracket, I'm sure it will work. By the way, I noticed some comments you made on another thread about vintage Star drums. I just sold a vintage red marble Star set -- 20" bass, 12" tom, 14" floor tom, and matching 5x14 snare drum, along with stands and bass pedal for $375. I should have talked to you first, and then asked for more . Actually, it was a pretty good deal for me even after I put a lot of work into cleaning it up and adding missing tension rods, screws, etc., because I only paid $50 for the shells. I didn't realize that it was a vintage drum set until after I bought it and got curious and did some research on the web. It really was a good looking set of drums. I'll check with you next time.

Actually, I don't own that bracket. I grabbed that picture from somewhere to use as a guide to make one (I need one, too).

So, sorry, I can't give any measurements.

If you're still interested in mine, it's like right at 3/4" wide. The mounting holes measure 14.5" center to center of hole.

Steve