Hi. I have more updates for you that keep following this project.
As you might remember, I needed to remove the scratches from the wraps. Since I have other pending projects, and one of them is a Vistalite kit that needs to be polished, I bough the Novus 3,2,1 from UK. It was expensive but I knew that it would work perfectly on Vistalite acrylic shells and it would be useful in my other projects.
I started using the polish #3 to remove the deep scratches. Some scratches were very deep and it couldn't remove them, but it did a good job. This step left light scratches all over the wrap, but it is normal since this polish is the most abrasive of the kit.
The #2 took of all the scratches that were made by the #3. This is were it became interesting. At this point I started to see the reflection more clearly.
At the end I used the #1 to clean the surface and make it shine.
Important: I always used the microfiber cloths that came with the Novus bottles.
Before polish
[IMG]http://i1028.photobucket.com/albums/y341/joaojanina/00_800_450_zpsc2dvfyjg.jpg[/IMG]
After the step #3
[IMG]http://i1028.photobucket.com/albums/y341/joaojanina/01_800_450_zpsbmzp51pn.jpg[/IMG]
The polish filled the cracks and dried. This is why you see the white lines.
[IMG]http://i1028.photobucket.com/albums/y341/joaojanina/02_800_450_zpsipixdm02.jpg[/IMG]
[IMG]http://i1028.photobucket.com/albums/y341/joaojanina/03_800_450_zpspvznvblo.jpg[/IMG]
[IMG]http://i1028.photobucket.com/albums/y341/joaojanina/04_800_450_zpsmlbaucay.jpg[/IMG]
I did this by the end of the day and it was dark when I got the steps #2 and #1 completed, so I have few photos with good quality. Anyway, check this out:
[IMG]http://i1028.photobucket.com/albums/y341/joaojanina/05_800_450_zps0xowdbpy.jpg[/IMG]