I needed to find some mufflers for a set I bought recently. The round mufflers seems set for the toms. The dual pad seemed for the snare. Not absolute, but based on info I did come across.FYI - If you do not find a chrome rod (I have not) for the bass drum cymbal rod, I will be using a 5/16" stainless rod from hardware store. Local store had one when Home Depot did not. Also on Amazon if desperate. Found 3' rod and cut to length, though might find a 2' in some places.

Just asked that question myself elsewhere. 8mm rod with 6mm threaded end, 60cm length. Basically 5/16" x 24"

Here are pictures from the seller. I have not taken any yet myself. I've only given them a cursory Windex cleaning and put on some used heads I had laying around.I plan to polish up the chrome once I get a chance.The tom mount is not original. I have been looking for a reasonably priced one, but need to see if the current one has left a mark / indention in the wrap, before I spend money replacing it. I assume it will probably look better to leave the current one. Has anyone had luck fixing bubbled wrap? I have read where some people have heated the area with a hair dryer to try and soften the glue underneath to get it to re-stick. I assume I would need to leave it clamped for a while, but am not too hopeful that is really a viable long term solution.