Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 137.28601%

Rogers Swiv-O-Matic Swan Leg Hi Hat Stand

Loading...

Greetings,

This Hi-Hat stand is in excellent condition, with all original parts. There is one issue to disclose:

I am not a Rogers expert, but I believe that the hex head screw that connects the two metal pieces on the top of either side of the foot board (that connect the foot board to the lower pull rod) is not original (See the two Photos in the reply below). It works fine and everything functions as it should. It was like this when I acquired it, and I've never had another one before, so I cannot be 100% sure if the screw is original or not. There are nylon washers between the metal "pedal connector" and where it attaches to the lower pull rod. It's quiet and no metal to metal contact is happening. Otherwise, really nice shape. Has the original clutch (the t-screw on the clutch has they stylized "R"). The clutch may have some non-original nuts/washers (again, never owned one so not 100% sure) but the actual clutch and T-screw are original. Close up clutch pics in the reply below.

$75 plus shipping.

Thanks,

V

5 attachments
96.2 kB
114.3 kB
63.1 kB
41.2 kB
99.1 kB
Posted on 6 years ago
#1
Loading...

The two photos showing the closeup of how the foot board attaches to the lower pull rod. Two close up photos of the clutch, with the felts etc. removed. Last photo is the bottom of the heel plate.

5 attachments
45.6 kB
74.9 kB
66.5 kB
126.5 kB
70.3 kB
Posted on 6 years ago
#2
Loading...

One more photo:

This is the very bottom of the stand that is closest to the ground. It looks like there are threads in that hole, but I'm not sure what would've gone in there.

1 attachments
68.5 kB
Posted on 6 years ago
#3
  • Share
  • Report
Action Another action Something else here