Need suggestions on how to remove wrap tape marks on bd shell.
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Removing wrap tape marks
Posts: 98
Threads: 49
Loading...
Pog Mo Thoin
Posted on 9 years ago
#1
Posts: 6170
Threads: 255
Loading...
I ran into this same situation with a 4 ply chrome over wood Ludwig snare. It had already been unwrapped when I got it. That outer piece of maple is only so thick. I sanded the best I could. But it was still somewhat visible. After I did the finish work on the wood, it didn't really stand out all that bad in the end. I used tung oil on the maple.
Mike
Posted on 9 years ago
#2
Posts: 721
Threads: 30
Loading...
Goo gone or goof off works.
Joe
“I did not trip and fall. I attacked the floor and I believe I am winning.”
“I did not trip and fall. I attacked the floor and I believe I am winning.”
Posted on 9 years ago
#3
Posts: 6170
Threads: 255
Loading...
On mine, the tape,glue and any residue was already gone. It had simply penetrated the maple and left the marks.
Mike
Posted on 9 years ago
#4
Posts: 1685
Threads: 529
Loading...
Try this:
http://www.de-solv-it.com/all-products/contractors-solvent/
I used to swear by Lighter Fluid (always worked better than Goof Off or Goo Gone). Now I swear by this stuff. It's easy to use in a spray bottle and actually smells pleasant. Stuff works miracles!
Posted on 9 years ago
#5
- Share
- Report