Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 129.06054%

Re-wrapping Tip on Seams

Loading...

Greetings,

Many of you may know about this and perhaps do this yourselves, but I found a quick and cheap trick on re-wrapping, when it comes to reinforcing seams: Paint Stirrers!

They are free at any local or big box hardware store (even if you are not buying any paint). I use two on top of each other for more rigidity/support and I typically go two wide as well. All you need are four stir sticks and four spring clamps. I usually leave it clamped for a few days, but that's completely up to you.

Stir sticks come in shorter lengths too (for quart cans). They can also easily be cut or trimmed to the length you need. Photo is a 14" x 14" floor tom. I hope this tip helps.

Enjoy!

1 attachments
Posted on 5 years ago
#1
Posts: 350 Threads: 33
Loading...

Great idea!

However, our local Lowe's has stopped distributing free paint stirrers. Had to buy them yesterday.

1974-75 Rogers Starlighter IV New England White 13/16/22 (w/Dyna)
1964-67 Rogers Blue Glass Glitter 12/14/16/20
early Oaklawn Camco Blue Moire 12/14/20
1926 Super Ludwig 5x14
1960-ish Ludwig COB 5x14 Super Sensitive
1960-ish Ludwig COB 6.5x14 Super Sensitive
1970 Ludwig COB Cut-Badge 5x14 Supra Phonic

Looking for a Camco Aristocrat SD in Blue Moire!!
Posted on 5 years ago
#2
Loading...

Great idea!However, our local Lowe's has stopped distributing free paint stirrers. Had to buy them yesterday.

Yes, a great idea! I never thought about paint stirrers and usually ended up cutting some wood to the length I needed. Now, I'll have to check my local Lowes and Home Depot to see if they are still free. As kdg mentioned, they're probably not anymore!

-Mark

Posted on 5 years ago
#3
Loading...

Also, you may consider a "yard stick" for this tip as well.

Posted on 5 years ago
#4
Posts: 1427 Threads: 66
Loading...

The 5-gallon bucket stirrers are even heavier. But, if you glue up a “T” structure before hand, it will be WAY stiffer and stay straight for you.

You can also make up a full length clamp with a couple (straight) 2X3’s, drill a half inch hole outside the tallest shell you intends to cover (probably 16” for a floor Tom), and some threaded rod, washers and coupling nuts. You can get serious clamping force with this rig. I made up something similar when I made guitars. My “bolt on necks” were a press fit into the body for better vibration transfer and to keep the neck in proper alignment.

Cobalt Blue Yamaha Recording Custom 20b-22b-8-10-12-13-15-16f-18f
Red Ripple '70's Yamaha D-20 20b-12-14f
Piano Black Yamaha Recording Custom Be-Bop kit 18b-10-14f
Snares:
Yamaha COS SDM5; Yamaha Cobalt Blue RC 5-1/2x14; Gretsch round badge WMP; 1972 Ludwig Acrolite; 1978 Ludwig Super Sensitive; Cobalt Blue one-off Montineri; Yamaha Musashi 6.5X13 Oak; cheap 3.5X13 brass piccolo
Posted on 5 years ago
#5
  • Share
  • Report
Action Another action Something else here