Any tips for re-sealing the seams on old glass glitter wraps. My Gretsch RB kit in Blue glass glitter has some minor lifting on the 14X14 and pretty significant lifting on both seams of the 14X20.
Anyone know where to get grommets for RB's too?
Thanks!
Use a needle and syringe to put small amount of contact cement in the area you need to seal again - then press down ideally with a piece of wood along the length of the seam and clamps holding the wood in place against the shell. That should do it.
If there appears to be lumps of glue residue where it is lifting, then try and get them out first obviously - but many of these problems arise because the glue wasn't quite thick enough to start with.
D
Many Thanks!
