Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 130.66388%

Parts - Ludwig and (maybe) Gretsch (Mikey?)

Posts: 225 Threads: 24

Hey Guys,

I just need some small odds and ends--all should be period correct.

1) 6 hole 14" COS rim for a 1965 Ludwig club date floor tom. So basically any Pioneer batter-side rim or club date FT chrome piece will work.

2) 6x Ludwig tension screws to hold the COS rim to the 65 club date FT (are those the 5" ones?)

3) Carriage bolt to hold an early 6 ply Round Badge Gretsch mounted tom to the rail consolette. The nut would be helpful as well...I broke the bolt when trying to adjust it recently and the nut is stuck to the broken stem. Arrggh.

4) A very small 1/4" nut for the small bracing screw that holds a Round Badge era Gretsch mute to the drum. (Yes even I would go for new on this piece if I lived in USA...but in Europe no 1/4", just metric!).

Please PM with prices including shipping if you have any or all of the above.

Thanks!

Posted on 14 years ago
#1
Posts: 5227 Threads: 555

From knavel

Hey Guys,I just need some small odds and ends--all should be period correct.1) 6 hole 14" COS rim for a 1965 Ludwig club date floor tom. So basically any Pioneer batter-side rim or club date FT chrome piece will work.2) 6x Ludwig tension screws to hold the COS rim to the 65 club date FT (are those the 5" ones?)3) Carriage bolt to hold an early 6 ply Round Badge Gretsch mounted tom to the rail consolette. The nut would be helpful as well...I broke the bolt when trying to adjust it recently and the nut is stuck to the broken stem. Arrggh.4) A very small 1/4" nut for the small bracing screw that holds a Round Badge era Gretsch mute to the drum. (Yes even I would go for new on this piece if I lived in USA...but in Europe no 1/4", just metric!).Please PM with prices including shipping if you have any or all of the above.Thanks!

I have the 6 t-rods for the floor tom,could you check how long the ones you have if i recall right the t-rods are closer to 5 3/4" long..have the complete carriage bolt and nut N.O.S.,,also have the nut for the gretsch muffler do you need the hex nut or the press steel flat looking nut?/ i have both...P.M. me Thanks mikey

Posted on 14 years ago
#2
Posts: 28 Threads: 10

Hey Mikey...I measured the ones on my club date and they are 5 5/8 from the shoulder, 6" overall. Although 5 3/4 will work just fine. These things are quite a bit longer than they need to be I think. Hope that helps.

Posted on 13 years ago
#3
Posts: 225 Threads: 24

There's a guy who sold what I know to be a correct set of the rods on ebay and he told me they were "just under 5.5" " so there would seem to be some variation in length on these of about a 1/2 inch.

Posted on 13 years ago
#4
  • Share
  • Report
Action Another action
Something else here