So,I found a Super Ten shell on 3bay to complete the assemblage of the parts I had lying around.Or so I thought...Ludwig cup washers do NOT work to install the lugs onto the shell due to the shape of the inner beading.What do the correct washers/shims look like,and does anyone have 20 to spare?I also need a Rogers butt plate.This project is to use the parts from a badly botched "custom built"DOH piccolo snare I picked up last year.Help me,brothers and sisters......
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Big R Rogers Super Ten questions-
Posts: 2197
Threads: 202
Loading...
Posted on 12 years ago
#1
Posts: 6363
Threads: 223
Loading...
The cup washers would be the same as those for the Dynasonic and Powertone COB shells. There was a recent thread about these, which you should be able to easily find. Hope this helps. Best of luck with your build!
Posted on 12 years ago
#2
Posts: 6287
Threads: 375
Kevin
Posted on 12 years ago
#3
Posts: 2197
Threads: 202
Loading...
Thank you gentlemen-now I ask- who's got any?I'll post on the "wanted"section,too.
Posted on 12 years ago
#4
- Share
- Report