Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 129.86221%

40's L&L 7x11 Tom

Loading...

Rare size. So when I saw it in Pro Drum 2-3 years ago....I bought it.

Finally getting to it.

Stripped the black.

Under it was white or whitish gold. Under that grey primer..thick.

Inside needed to be stripped, I thought.

Was not original AFAIK. Came off much easier than the outer.

Seems like the wood was clear coated or oiled originally.

Under the white paint inside the shell, I found these ink stamps.

One, says "44" and the other "Sin. T" with what look like a stamp of nails going sideways through the bottom part of the T.

I am thinking ........year made 1944.

Do not know about Sin. T.

Great Name.

BLAEMIRE DRUMS
Thanks to Mr. Jerry Jenkins
Posted on 9 years ago
#1
Loading...

contact me when you are ready to put heads on that, I can make them for you.

Posted on 9 years ago
#2
Loading...

Right now, I have coated ambys for it.

Remo makes them stock.

I am not going to do a calf tack head on bottom.

Regular head and rim.

Is that what you make, calf?

BLAEMIRE DRUMS
Thanks to Mr. Jerry Jenkins
Posted on 9 years ago
#3
Loading...

Scott - Do you have a hoop and clips for the new bottom head? Sweet drum! I have a 7"x11" on Big Blue. Excellent high-toms. You should finish it to match one of your kits and use it.

John

PS - How's Jerry?

Too many great drums to list here!

http://www.walbergandauge.com/VintageVenue.htm
Posted on 9 years ago
#4
Loading...

I have a single flange brass rim for the bottom.

Bought a 12 and had a machinist cut it down to 11.

He made an overlapping notch in it and brazed it.

Why............got an extra 11" single flange lying around?

Doesn't everyone?

"These go to 11"

I have some clips. Been collecting them for awhile.

Some vintage/original, some new.

Anyone know what the stamps inside the shell are?

BLAEMIRE DRUMS
Thanks to Mr. Jerry Jenkins
Posted on 9 years ago
#5
Loading...

From green glass drum

I have a single flange brass rim for the bottom.Bought a 12 and had a machinist cut it down to 11.He made an overlapping notch in it and brazed it.

That is incredibly awesome. How'd the nickel hold up? Cool that it will have the two rims.

From green glass drum

Anyone know what the stamps inside the shell are?

I wish I did, because then not only could I help you, but I'd probably know a bunch of other cool stuff too...

Mitch

Posted on 9 years ago
#6
Loading...

From green glass drum

Right now, I have coated ambys for it.Remo makes them stock.I am not going to do a calf tack head on bottom.Regular head and rim.Is that what you make, calf?

Yes, I make calfskin heads

Posted on 9 years ago
#7
Loading...

From CT Pro Percussion

Yes, I make calfskin heads

Cool man. Good to know.

Thanks

BLAEMIRE DRUMS
Thanks to Mr. Jerry Jenkins
Posted on 9 years ago
#8
Loading...

Sin t Math

Sin t is defined as the y-coordinate of the point P on the unit circle where t is the angle of the radius OP.

Your task is to find the angle that satisfies the equation

sin t = a when a is given

1 attachments
BLAEMIRE DRUMS
Thanks to Mr. Jerry Jenkins
Posted on 9 years ago
#9
Loading...

From DownTownFarmer

That is incredibly awesome. How'd the nickel hold up? Cool that it will have the two rims.I wish I did, because then not only could I help you, but I'd probably know a bunch of other cool stuff too...Mitch

Paint is mostly gone. I highly recommend Citristrip from Home Depot.

Easiest stripper I have used. "wait...did I say that right?'

See pic of cut and brazed brass SF Rim,(it was a 12 or a 13 cut down, I think 13).

I tried but could not locate an 11" SF rim.

Also see pic of the original SF rim that came with the drum.

I have not cleaned or polished the nickel rim.

We wills see.

BLAEMIRE DRUMS
Thanks to Mr. Jerry Jenkins
Posted on 9 years ago
#10
  • Share
  • Report
Action Another action Something else here