Important Web Site Pages
Important Web Site Pages
|
Vintage Drum Identification
|
Restoration and Help
|
Visit our Partner Web Sites
|
#1
|
|||
|
|||
![]() ![]() |
#2
|
|||
|
|||
![]()
I had a kit of Resonators back in the 80s and removed the "resonator" ply using a putty knife to lift where the seam joined together. But you have to be careful cause the ply is very thin and held in a considerable tension.
|
#3
|
|||
|
|||
![]()
The vintage premier drums site run by Tam Rankin has some
useful info here http://vintprem.moonfruit.com/#/repa...ets/4536800167 |
#4
|
|||
|
|||
![]()
I restored some resonators and it is tricky getting those inner shells out. Even tougher getting them back in and the mufflers . Those inner shells are flexible but you have to be very careful. Use a small putty or butter knife and work down one side of the seam and it will close in around itself. I used the diagram on the link in the previous post to go by. Just be cautious and take your time. It is easy to damage those inner plys.
|
![]() |
Thread Tools | |
Display Modes | |
|
|