Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 133.87056%

WTB: Rogers Tower 12x8 Tom Tension Rods

Posts: 1142 Threads: 134

I'm looking for the following to finish my Tower 12x8 tom tom:

- 6 - 3 3/8" long Tower Tom Tom tension rods with washers

Thanks,

Tim

Posted on 8 years ago
#1
Posts: 6583 Threads: 644

How many Tim?

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 8 years ago
#2
Posts: 1142 Threads: 134

I need six (6) with washers to put on the resonate head.

You wouldn't happen to have a late 60's 12" Rogers hoop too?

Tim

Posted on 8 years ago
#3
Posts: 6583 Threads: 644

Hi Tim,

I might have a 12" R rim...will try to remember to look tomorrow....when at drum storage unit...

Still have to check for rods.....does yours have the blips at the top..or no?

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 8 years ago
#4
Posts: 1142 Threads: 134

The tops are straight on all four sides (no blip or dimple).

-Tim

Posted on 8 years ago
#5
Posts: 1142 Threads: 134

Here's a picture of one of the tension rods.

-Tim

1 attachments
Rogers Tower Tension Rod.jpg
59.9 kB
Posted on 8 years ago
#6
Posts: 6583 Threads: 644

Hi Tim...looked at the rods..

5-7/8" are the longest ones I have...measured just below the flared out collar...

Tip to tip...6-1/4" long...

Too short?

There are no blips...but are not Rogers either....

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 8 years ago
#7
Posts: 1142 Threads: 134

I think we've had a miscommunication in measurements.

I need 6 Tower tom tom tension rods (with Rogers washers) that are 3 3/8" long from end to end.

Sorry for the confusion. I hope this helps and that you have some of these available.

-Tim

Posted on 8 years ago
#8
  • Share
  • Report
Action Another action
Something else here