Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 135.28184%

Slingerland Floor Tom Leg Mounts

Loading...

I'm looking for 3 Slingerland Floor Tom Leg mounting brackets for a late 50's 14 * 14 floor tom. I've got the legs.... well at least I've got a set of 18" straight floor tom legs that I think should work. Would probably need to check the diameter of the brackets to make sure the legs I have are correct, otherwise I need legs also.

Hole spacing for the brackets is 2 5/8" (center to center).

Been looking for this for a while but the urgency is now greater as I have located a 20" bass drum to go with the floor tom and a nice 12" tom that I've had for a while, all in WMP.

Thx,

Peter

Posted on 10 years ago
#1
Posts: 3467 Threads: 116
Loading...

9.5mm should be the diameter of the legs that you have.. if you are sourcing original mounts... good luck with those fairly "hard to find" items..

Cheers

John

'77 Slingerland 51N,Super Rock 24,18,14,13.. COW 8,10 Concert toms
'69 Slingerland Hollywood Ace
'75 Rogers Dynasonic 6.5 x 14, 10 lug COB
'77-78 Slingerland 6.5 x 14, 10 lug COB
'78-79 Slingerland 5 1/4 x14 8 lug COB
'79 Biman 5 1/4, Acrolite
'82 Slingerland 5 1/4 x 14. Festival COS
'84 Tama MasterCraft Superstar 6.5 x 14, 10 lug Rosewood
'98 Slingerland (Music YO) 6" 10 Lug Maple.. NOS
Zildjian, Sabian , UFIP & Paiste mix.
Posted on 10 years ago
#2
Posts: 1296 Threads: 208
Loading...

The push button type?

Never play it the same way once.
Posted on 10 years ago
#3
Loading...

Yes, the legs I have appear to be 9.5mm. I'm not 100% sure if it used the push button type mount... from a bit of research, it appears that they started using these in 1958, and this drum is stamped early '58 but the hole spacing is 2 1/2" on my drum and I read that it's 2 1/4" on the push button mounts. However there's an older style mount on Ebay right now which has hole spacing of 2 1/2".

Guess I need to find a way to verify hole spacings before I buy.

Posted on 10 years ago
#4
  • Share
  • Report
Action Another action Something else here