Greetings,

I just don't have the time or energy to finish these.

Sizes are 8" x 12", 9" x 13", 16" x 16" and 14" x 20".

Wrapped was stripped off when I got them, as were the heads and hoops. Previous owner put a light clear coat on the shells. These are the thicker 9 ply shells with the gray painted interiors. Here's the skinny on these:

Bass Drum: Previous owner painted the inside of the shell black. Needs hoops, heads and will need 4 T-rods and 4 claw hooks (I have 12 of the 16). The spurs were missing when I acquired it, I will include the spurs shown. They are just barely long enough. The brackets accept standard 3/8" rods, so you could get a 3' length of solid 3/8" rod at a hardware store and cut to size and throw a rubber tip on one end if you want them longer. The right side spur bracket (from playing position) has a stripped wing screw. Wing screws are not original. Rail mount and tom holders are good, if not a little dirty/rusty. No extra holes.

Rack Toms: Just need hoops and heads. Tension rods, Quick on/off tone controls and brackets are complete.

Floor Tom: Needs hoops, heads, legs and 8 tension rods (I have 8). One of the wing screws on the leg brackets is non-original. Quick on/off tone control is complete.

All shells are in good condition and are in round. The lugs currently accept 6 mm tension rods, but the lug inserts are removable/replaceable if you want to use standard 12/24 tension rods. All badges are present. No extra holes or mods from what I can see.

More pictures available upon request. $100 plus actual shipping. These will look great all cleaned and re-wrapped....perhaps in a satin flame??

Thanks,

V