Hi,
I'm new to the forum and would greatly appreciate your comments and expertise.
I've got a Slingerland mid 60s Duco kit that needs some TLC. I want to preserve it as much as possible and keep the vintage vibe and road worn look like the old Fender guitars. I've torn apart the drums - cleaned the hardware and plan to install new heads all around. I want a set of "new" - "old" drums that has a ton of vintage mojo.
My quandary is that the Duco finish is starting to crack and chip off in places. I've attached a pic that shows the worst of the finish damage. I can't replace what's already gone and that's OK - but want to preserve what's left as best I can for the next 50 years.
Seems to me I've got 2 basic options to preserve the finish:
1. I'm considering spaying a clear coat protective finish on the shells. This would help prevent further chipping and cracking of the paint off the shells - but it may be frowned upon by vintage collectors and hurt the value of the kit long term - I know the Fender Strat and Tele guys don't like messing with a vintage guitar finish and want to keep the original road worn finish missing paint and all. I'm considering using a Minwax water based Polycrylic clear satin protective finish if I decide to go this route. Maybe I should be considering something else ??
2. The other option is to just carefully clean and maybe wax or oil them.
This seems more in tune with keeping them pure road worn and vintage. However this will not stop the chipping flaking and cracking of the duco finish and in 50 years there will be no duco finish.
I'm leaning towards option #1 but not convinced that's the right path. What do you guys think ?? I would greatly appreciate any opinions, comments, or perspective that you may have.
Thank You !!
Drum Doug