Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 135.28184%

Ludwigs wrapped in leopard fur

Posts: 1344 Threads: 172
Loading...

I just picked these Ludwigs up today. I agreed to buy without knowing exactly what was hiding under these pretty shagadelic looking leopard furs. Pictures will tell the story.

Sadly these shells were drilled for Pearl mounts.

Big Beat set?

Posted on 8 years ago
#1
Posts: 1344 Threads: 172
Loading...

First look at 12" tom covered in some kind of dried glue. Any tips?

Posted on 8 years ago
#2
Loading...

If the glue is sticky/rubbery you could maybe start with warm water and some sort of soap/detergent, progress to chemicals if necessary [I don't know which ones, is that black wrap or paint?]...if it's real hard and dry you might be able to slice it off with a super sharp razor, like taking a decal off glass. I did that on my Club Dates to a streak of what looked like cola that *nothing* else would remove. That was on wrap [Ludwig smooth not Rogers "orange peel"]

At least they did a meticulous job drilling for that Pearl mount DOH

Mitch

Posted on 8 years ago
#3
Posts: 1344 Threads: 172
Loading...

From DownTownFarmer

If the glue is sticky/rubbery you could maybe start with warm water and some sort of soap/detergent, progress to chemicals if necessary [I don't know which ones, is that black wrap or paint?]...if it's real hard and dry you might be able to slice it off with a super sharp razor, like taking a decal off glass. I did that on my Club Dates to a streak of what looked like cola that *nothing* else would remove. That was on wrap [Ludwig smooth not Rogers "orange peel"]At least they did a meticulous job drilling for that Pearl mount DOHMitch

Thanks for the info, Mitch. It's a black wrap and the glue is dried on and not at all sticky. I'm not sure what type of glue was used, but I'm sure I can get rid of it. I'll post updates here. Thanks.

Posted on 8 years ago
#4
Loading...

From Chromeo

First look at 12" tom covered in some kind of dried glue. Any tips?

I think you need a taxidermist!

Zach

Currently looking for a 3-ply 24x14 Ludwig in champagne sparkle w/rail consolette and cymbal mount!
Posted on 8 years ago
#5
Loading...

nice kit underneath it all.

the webbing pattern looks like its spray glue.

depending on what the glue is on, i can sometimes flake it off with my finger, roll it off or use duct tape because its more like weebing and not solid like other types of glue.

http://www.drummerfish.weebly.com for drum parts, drum promos , swag, promo media and more for sale
Posted on 8 years ago
#6
Loading...

What do they say, beauty is skin deep? Get all that skin off and you may have a beauty. Can you imagine the bar that kit was being used in. Ugh. Good thing you saved those babies. You'll be getting some more responses, but use the search engine looking for glue or glue removal and you may get your answer right away. I know I've seen post on folks doing that.

Posted on 8 years ago
#7
Loading...

I saw one on Craigslist a few years ago of an Austin Fibes covered in pink tiger fur.

Quirky is one thing ,but that's just sacrilege.

Posted on 8 years ago
#8
Posts: 1344 Threads: 172
Loading...

Thank for the replies guys. I managed to remove the dried in glue from the black cortex. I sprayed the areas with WD 40 and let it sit for a while. I later went back and hit it with a damp cloth and I managed to get rid of most of the glue. I had to scrap some parts with a knife. It didn't damage the finish in the slightest. Here is how the 12" looks now.

More photos to come...

These drums used to belong to some rock band back in the 80's / 90's who always appeared in small print on the festival bill. That kind of thing.

Posted on 8 years ago
#9
Loading...

Now that's lookin more like it! Are you keeping the Pearl mounts then?

Mitch

Posted on 8 years ago
#10
  • Share
  • Report
Action Another action Something else here