Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 134.27140%

Leedy cracked brass hoop repair

Posts: 291 Threads: 35

So I brought this hoop off another forum member for a leedy resto I'm

In the middle of doing. It arrived with an undisclosed crack on one side.

Looks like it has been there for awhile and that an attempt gas been made

To braze it as it is blackened around the area.

It is a 14" 20's leedy professional model hoop made of brass. I want to have it

Repaired before having it chrome plated to match the other hoop on the drum.

It really only needs to Be filled prior to plating I think. I have read that a low temp silver solder method

Would probably be right for this repair. Any ideas/input on fixing this would be greatly appreciated.

1 attachments
image.jpg
93.7 kB
Posted on 9 years ago
#1
Posts: 291 Threads: 35

Picture of crack

1 attachments
image.jpg
43.8 kB
Posted on 9 years ago
#2
Posts: 9005 Threads: 266

That is something I would leave to the plating company. You can include the crack repair as part of the plating job. I'm sure they can do a professional job for you where you won't be able to find where the crack was after they're through with it.

John

Too many great drums to list here!

http://www.walbergandauge.com/VintageVenue.htm
Posted on 9 years ago
#3
Posts: 527 Threads: 57

Like John says give it to the plating company they will braze it for you and you will not know were it was after they finish.

Posted on 9 years ago
#4
Posts: 291 Threads: 35

OK, good call guys. I emailed the plating company and yes they

will take care of the repair. Thanks!

Posted on 9 years ago
#5
Posts: 9005 Threads: 266

That's what friends are for... :p

John

Too many great drums to list here!

http://www.walbergandauge.com/VintageVenue.htm
Posted on 9 years ago
#6
  • Share
  • Report
Action Another action
Something else here