[COLOR="DarkRed"]This puppy was really in bad shape...don't have any "before" shots but it was a Cleveland with cracked B & B lugs, black gloss wrap in horrific shape (gouges, scratches, tears), and each drum had at least one bearing edge that looked like it had been attacked by pirhanas...someone had at some point removed the bottom hoops and lugs to make it a concert tom sorta kit, thus the res edges were all basically left exposed to whatever knockabouts it managed to survive...
Honestly, I bought the kit for $350 or so from a guy who just wanted it gone; not that it was worth much more than that; poor thang had been so abused....and I really just needed the swivomatic hardware, the badges, the older-type bass claws and rods, and the 1960's Avedises that came with it. It had no snare drum, too.
So, as 2/3 of the B & B's were cracked, I just sold off the remaining good ones on eFlay for $120.
These sat, stripped shells, in my garage for almost a year until a client wanted me to work up a nice old-school rock kit. 22/13/16...snare is interesting, a Rogers Spotlight 5" tall (yes) x 14"....hadn't been altered, was really 5".
No way was I gonna invest in B & B repros for this one, so I widened the holes to take beavertail lugs, stripped off all the wraps, rewrapped, and reinstalled the swivomatic hardware. I used the later-style Rogers rods and claws, since the lugs were now B'tail...but they are still '60's vintage.
Was able to salvage the tom edges (both res sides, thank goodness) by re-routing. Fortunately, the original Rogers batter side edges were still good.
For the bass drum, I had to take off 3/8" from the chewed up edge...got it back down to flat then re-routed with a 45 degree interior bevel and a very small roundover exterior. VERY close to looking like the original Rogers edge...To compensate, I had to then elongate the lug holes away from the new edge so they wouldn't appear to be closer to the new edge than the original edge opposite. The knobby mount on the bass was originally set lower towards the side, but she wanted to use the mount for cowbells as opposed to a cymbal arm...so the revised location made more sense.
End of story. Client very stoked. I am, too..and also glad it's over...these were very labor-intensive and time-consuming....
[/COLOR]