Hello men. Wondering what is the best way to re-attach these pearl badges. They are very thin aluminum with some of the origional glue residue still present. I removed them from pvc wraps with a putty knife after the wraps were removed from the drums and they actually still have the curved shape to them. Last time I did this I used a two part epoxy and an old paint brush. I had trouble getting the badge nice and flush without the corners sticking up. It was like the glue was too thick. And I did not have a plan for clamping them either. This time I want it right!
Any input would be appreciated. The finish on the drum is new lacquer with a blue die under.
Thank you,
Jeff