I have a 60's Rogers Kit with the 3/8" straight legs and need some type of clamp to help support the drum . Any thoughts ? I also am in need of the actual T wing nuts that screw into the mount itself .I know these are rare.
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
floor tom leg multi clamp
Posts: 6
Threads: 2
Loading...
Posted on 11 years ago
#1
Posts: 174
Threads: 26
Loading...
If I am understanding your problem correctly, I use small hose clamps around each leg as a memory lock.
Ludwig Drums ('65-'69)
Posted on 11 years ago
#2
Posts: 713
Threads: 76
Loading...
Go to a good hardware store and get you a pair of "set collers" They will slide over the leg and then you lock in place with a set screws. If the legs are 3/8" you might have to buy 3/8 collers and then drill them out with a 25/64 drill. That will give you a real nice fit.
Posted on 11 years ago
#3
- Share
- Report