Well I found this, what type of bit might they have used to achieve this? Click on the "Our Edges" link and look at the diagram on the far right.
Cutting a round over bearing edge
https://www.GeorgiaPhil.com
Drum Wrap, Drum Heads, Drum Accessories
https://www.StuffForDrummers.com
Well I found this, what type of bit might they have used to achieve this? Click on the "Our Edges" link and look at the diagram on the far right.http://www.drummaker.net/1-800-NEW-DRUM/www.drummaker.com/FMPro?-token=3758776828&-token.1=&-DB=DM_Products.fp5&-LAY=CGI&-format=hitlist_Wood_Snare_Shells.htm&-error=search.htm&-view
My guess is they use that 60 degree bit for the inside and a 3/16 or so round over for the outside.
Thank you!
Jeff C
"Enjoy every sandwich" Warren Zevon
Here we go. Amana makes nice bits, you need the 60 degree bit to achieve a 30 degree edge. The cutting edge is 60 degrees to the shank, leaving a 30 degree edge on your stock, or drum. I think I will order one, only 116.00.http://www.amanatool.com/routerbits/chamfer-router-bits-49400.html
That is the exact bit I posted. I thought, in your book, this won't work ;)
Ron, you are correct! Here is why I thought it was the wrong bit, when I looked at it I saw a 60 degree cutter thinking it would cut a 60 degree profile. But the 60 degrees is to the shank, leaving a 30 degree chamfer. I had this backwords, who would have thought you would use a 60 degree bit to cut a 30 degree edge??? Some cabinetmaker I am,lol!
Sorry I missed that, thanks for pointing it out!
Thank you!
Jeff C
"Enjoy every sandwich" Warren Zevon
Just a little good-natured picking, Jc - thanks for taking it as such. And don't feel bad; I'm famous for poor explanations. After all, it makes sense in MY head; isn't that enough?
- Share
- Report