Hello,
I'm new to the forum, so not sure if this is the best place to post, if there's a better, please let me know - thanks.
I have an Oaklawn Camco set, and a mix of Oaklawns and LAs for a second set. My 12x8 and 14x14 have real problems getting in tune, and I think the bearing edges are shot.
Also, there is a big lump in one re-ring where the joint of the ring is supposed to meet the shell -- looks like someone may have tried to glue it, not sure.
Anyway, was wondering about how and who to contact for repair:
I'm thinking they need the bearing edges re-cut, and don't know who to trust these drums to for removing the weird lump....What are considerations when choosing which bearing edge to go with? 45, rounded, or other?
Also, might be silly, but will repairs like these trash the "original condition" value? (I love these drums, but I don't want to sit there and look at them - I want to play them).
Last, any recommendations on what to use as polish? Would "Meguiar's Cleaner Wax" be OK, or could the wax mess up the resonance or other factor(s)? There is a nice gloss finish on the maple set, but the walnut (mahogany?) toms don't have any shellac over the wood stain (so would wax soak in?).
thank you very much for any suggestions,
David