Do you have the older Ludwig double tom holder / tom mount Model No. 781 with the "LUDWIG" sticker?

If so, I think you could use one of these:

Ludwig Rocker Double Tom Holder 9.5 L-Arm w/1" Post.

[ame]https://www.amazon.com/Ludwig-Rocker-Double-Holder-L-Arm/dp/B00AHFY16C[/ame]

They are both 9.5mm arms, the only question is will it fit the Model No. 781 receiver in the bass drum. Someone on here will most likely know for sure, but I do believe it is a direct fit.

Steve

I believe it's the L771 from the research I've done, single stem with Ludwig name as you indicated. Thanks

If it's the original Ludwig double tom holder then anything with a 1" diameter down tube will fit the base plate (just double check by measuring the diameter of the hole the post goes into). I believe Ludwig still uses that size so modern Ludwig should work, as would Gretsch USA stuff . Gibraltar makes some similar stuff too. Really the only critical aspect is the diameter of the tube needs to be one inch and the diameters of the ball arm posts need to be 9.5mm (3/8ths inch). None of the metal in between those two ends really matters.

Here is the Gibraltar version, probably your lowest cost option (and very similar [identical] to what Ludwig has used)

http://www.gibraltarhardware.com/?fa=partsdetail&curcat=2&bnd=11&cid=104&sid=462&pid=1577

single holder

http://www.gibraltarhardware.com/?fa=partsdetail&curcat=2&bnd=11&cid=104&sid=462&pid=1576

and the ball arms you would need

http://www.gibraltarhardware.com/?fa=partsdetail&curcat=2&bnd=11&cid=104&sid=461&pid=1569

The Ludwig Rocker Double Tom Holder 9.5 L-Arm w/1" Post.will fit - thanks for the help!