Posts
Wet sanding black diamond pearl wrap
From Mr.Toast...
3 years agoWet sanding black diamond pearl wrap
Thanks for the advice. I’ve been sanding yesterday and today. I just finished with the 1500 grit. I am planning to finish with Novus 2 and the...
3 years agoWet sanding black diamond pearl wrap
From jaghog...
3 years agoWet sanding black diamond pearl wrap
Thanks! I’ll start out with my 65 Jazz Festival and see where it goes. Can you make some recommendations on buff compound and glaze coat?
4 years agoWet sanding black diamond pearl wrap
Thanks for the help. I’ll give it a shot.
4 years agoWet sanding black diamond pearl wrap
Can anyone share their experience wet sanding black diamond pearl (Ludwig) wrap to brighten the finish? I used Novus 3-2-1 but the wrap is still not...
4 years agothe original A. Zildjian & Cie.
The 11-1/2 inch had really bad cracks in the rim that spread in a couple of different directions. I may have made a mistake by cutting out the cracked...
4 years agothe original A. Zildjian & Cie.
Here are photos of the under side of the cymbals and they have a signature in the bell similar to the other photos.
4 years agothe original A. Zildjian & Cie.
Thanks for the help.
4 years agothe original A. Zildjian & Cie.
I have a couple of old Zildjian cymbals. The one with the cut out is definitely made in Turkey. It’s 11-1/2 inches. The other one is 12 inch...
4 years agoRefurbish kick drum beater
Thanks, that might be the ticket!
4 years agoRefurbish kick drum beater
I ground the peen off with a Dremel Tool. I think I’ll try the bleach on the felt while I figure out where to get a new one. I’ll use so...
4 years agoRefurbish kick drum beater
Thanks again for the suggestions. It is from a Ludwig junior pedal. Thin Shell, I was thinking about your suggestion and I may be able to grind off t...
4 years agoRefurbish kick drum beater
Thanks, any ideas on removing and reinstalling the metal cup on top of the beater? The felt beater itself is disintegrating and in really bad shape b...
4 years agoRefurbish kick drum beater
Any ideas for replacing the felt on a Ludwig & Ludwig beater while preserving the upper and lower cups?
4 years ago