Posts
Rogers floor tom shell, FREE to a good home...
I have a 16" Rogers XP8 floor tom shell. Stripped of it's wrap, it's ready for your project. Nice shell with good edges. FREE. You pay Approx $25 s...
10 years agoRogers Cleveland Tone Control Question
On the earlier drums, the threads were pinched with a needlenose pliers or similar tool after the tone control was assembled. On later drums, a locknu...
10 years agoRogers Cleveland Tone Control Question
That is an American thread, but I forget the size. I have a tap and die in that size at home for chasing the threads. I'm traveling now so I can't ch...
10 years agoRogers Left-handed Set-ups
A pair of clamp-on bass spurs could be used to turn the bass around.
10 years agoBlaemire kit on eBay - $20K - Really?!!
In these days of the 'net, these sellers think they can lie and lie and get away with it. Those days are over...
10 years agoHoliday and Dynasonic, sanity check
I've seen badges that were removed in order to clean the drum. Some folks are obsessive about getting all the wax and dirt off from around the badge,...
10 years agoHoliday and Dynasonic, sanity check
That snare drum is a 5-line (around the middle) drum. It can't have a 4xxx serial number. It probably starts with a 1 or a 2 that cannot be seen in th...
10 years agoHoliday and Dynasonic, sanity check
What is the serial number on the snare?
10 years agoHoliday and Dynasonic, sanity check
That 'D' on the black: that part must have been painted by someone, they never came that way. The edges and interiors look ok. The wrap is original....
10 years agoTiny ROGERS
I think that's an 18" bass. It might be an 18x12, Rogers did offer basses in that depth...
10 years agoQuestion about Rogers cymbal mount
From Dan Boucher...
10 years agoQuestion about Rogers cymbal mount
From the point of view of the picture, the mount on the right (the one with the center hole) is for a collet plate - to mount the tom. The mount on th...
10 years agoSlingerland /Rogers Trade
That bass has a mount for a twin-tom rig on top. As a 20-13-16, the kit is not complete. Probably came as a 20-12-13-16. A 13" on top of a 20" bass i...
10 years agoGot my first Slingerlands. Quality question for the experts.
I have seen sloppy construction on all the major brands from the 60's and 70's. Of course, the instances of this on Rogers are far less...
10 years agoWire wool for chrome?
Never, never, never, never, never, never.....
10 years ago