Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 132.26722%

Slingerland small tom mount

Loading...

This is a follow-up to my rewrap post.

The Ray McKinley style tom mount on my 1964 Slingerland set has never been great, and over time it has become worse. The tom should hang on the top part of the mount, but the drum bracket is loose and slips to the middle. (All of my photo files were too large to post, and the drums are packed away right now.) To reduce rattle, I put a small piece of rubber between the "heel" of the mount and the drum. Can this be fixed? If not, are there any opinions on a better mount? I have seen a Gibraltar updated rail mount that would have some of the original appearance, and allow the use of a rim mount for possibly better resonance. This would probably require new holes and would be done in conjunction with a re-wrap. Since the set is of little vintage value, I am trying to improve its playability. Thanks.

Posted on 14 years ago
#1
Posts: 6287 Threads: 375
Loading...

Here's a link... kinda pricey, but I think it matches vintage mounting hole patterns.

Kevin
Posted on 14 years ago
#2
Loading...

Thanks, Kevins. The diamond plate is the piece that I need. It is tight to the shell, but the little band that slips over the "spade" is loose. I'll check with them on the hole patterns.

Posted on 14 years ago
#3
Posts: 6287 Threads: 375
Loading...

Sorry, I misunderstood.... the ones I have are riveted.. I don't know about repairing them, or how long it would be before it got loose again. Hang loose, someone else will know....

Kevin
Posted on 14 years ago
#4
Posts: 3972 Threads: 180
Loading...

If I understand...you want to replace the tom mount? Currently, you are using a clipper...you already have the rail...ok.

I would replace the diamond plate clipper receiver on the tom with an L-Arm receiver. The clipper tongue has the same fit as an L-Arm. That way, you shouldn't have to drill and you get to keep it vintage looking.

I'm not a fan of putting modern stuff on a vintage kit...unless it's identical.

Posted on 14 years ago
#5
Posts: 6287 Threads: 375
Loading...

OK, I'm confused again... are we talking Slingy or Ludwig... ?? ...:confused:

Kevin
Posted on 14 years ago
#6
Posts: 3972 Threads: 180
Loading...

...or....

you could pull the ...

shoot. I didn't read it correctly. I thought we were speaking of Gretsch or Luddy. Dang.

Well...it would still work. You could use a RIMS mount with the L-Arm mount on the RIMS. That would maximize resonance and solve your issue. It won't look perfect vintage, but it would take care of your issues. Just a thought.

Posted on 14 years ago
#7
Loading...

Thanks, all. I am first going to try the "diamond plate clipper receiver" method and if that does not work out, go for a RIMS mount and L arm. The fading on this kit has reduced the vintage value, so I am now primarily looking for sound quality.

Posted on 14 years ago
#8
Loading...

From 60sThumper

Thanks, Kevins. The diamond plate is the piece that I need. It is tight to the shell, but the little band that slips over the "spade" is loose. I'll check with them on the hole patterns.

You don't need to buy anything - just repair what you have. Remove the diamond plate from the drum by taking off the four bolts. If the spade is loose and it is held by rivets, just tighten the rivets - position the rivet head on a vise and use a hammer to flatten the inside rivet where it is pulling away. It should work fine - someone must have put a lot of weight on the plate in order for it to loosen up - that shouldn't happen from normal playing.

Posted on 14 years ago
#9
Loading...

Well, the free solution worked. I tried tightening the rivets as suggested by 4MoreYearsOhNo and it did the trick. I was amazed by how soft the rivet metal was, but it just took a couple of taps from a ball peen hammer to tighten it up. Not sure how it got loose, because I am the only owner and it has not been hauled around that much or hit very hard. Thanks to all who posted.

Posted on 14 years ago
#10
  • Share
  • Report
Action Another action Something else here