Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 144.70146%

Rogers Knobby Set Screws

Posts: 3088 Threads: 326

Does anyone know a source for the set screws used on Rogers Knobby mounts, the ones applied to bass drum cymbal mounts and/or the floor tom leg mounts? Repros are fine. Most of what I see on eBay is for the locking screw on bass drum pedals. The ones for the knobby mounts are fairly long - maybe an inch or so. I did find one, but the key head was quite rounded off.

I didn't see anything on Reverb either.

I need 4. Two for a standard knobby and one for a cross style knobby,

And, by the way, does anyone know when the cross knobbies were phased out?

Thanks

Posted on 2 years ago
#1
Posts: 1460 Threads: 87

Try Steve Ellis on Rogers Buy & Sell FB page.

https://www.facebook.com/groups/rogersdrums2

Posted on 2 years ago
#2
Posts: 6363 Threads: 223

Hi Dan!

I just checked eBay and Steve is selling his stainless steel Rogers Knobby Pull Screws. Here's the link... https://www.ebay.com/itm/193490987162

-Mark

Edit: I just saw that he will NOT ship anymore! Bummer!

Posted on 2 years ago
#3
Posts: 404 Threads: 23

Another good reason to attend the PA Drum Show in October! Hopefully Steve will be there again.

From idrum4fun

Hi Dan!I just checked eBay and Steve is selling his stainless steel Rogers Knobby Pull Screws. Here's the link... https://www.ebay.com/itm/193490987162-MarkEdit: I just saw that he will NOT ship anymore! Bummer!

John/Levelpebble

Tama Superstar 81 Aqua bop
Rogers Cleveland BDP (x2), Silver bop, Champagne, Black/Gold Duco, WMP, Blue sparkle; Dayton Red Onyx;
Camco Oaklawn 12 14 20 5x14 Tuxedo WMP
LW 59 SC Blue Sparkle, WMP
WFL Gold Sparkle SC, WMP Compacto
Gretsch 49/50 Broadkaster WMP
Fibes Copper Forte
Remo MasterEdge Bop, Gold Crown, Mondo
Slingerland Conway Black Satin
70's MIJ Del Ray, my first and fav ok I'm lying here
Way Too Many Snares, She Says
Posted on 2 years ago
#4
Posts: 3088 Threads: 326

Thanks guys. Considering USPS has a decent small box rate You have to assume some other hassle is causing him to hold on shipping. As Mark says, bummer.

Posted on 2 years ago
#5
Posts: 5176 Threads: 188

I'm wondering if you could just grind down some lug screws....?

"God is dead." -Nietzsche

"Nietzsche is dead." -God
Posted on 2 years ago
#6
Posts: 681 Threads: 81

An alternate source for set screws is dw. Sorry, I don’t have a reference number. They offer packs of two for around $7. They are also correct in that the end is cupped where it contacts the ball.

Posted on 2 years ago
#7
Posts: 6363 Threads: 223

I looked through my Rogers stash and just sent two pull screws to Dan! The heads are a bit worn, but should work with no issues. During our emails, Dan mentioned he was in need of a Dayton-era bass drum claw with long extension, not the short extension. Had one of those as well and they will be keeping the pull screws company on their way to Dan!

-Mark

Posted on 2 years ago
#8
Posts: 59 Threads: 1

Can you please provide any information on the PA October show. I would love to check it out. Thank you

Posted on 2 years ago
#9
Posts: 5176 Threads: 188

Nice going, idrum4fun! You saved the day again! Cheers!

"God is dead." -Nietzsche

"Nietzsche is dead." -God
Posted on 2 years ago
#10
  • Share
  • Report
Action Another action
Something else here