Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 135.68267%

Ludwig tom bracket and floor tom bracket spacing/positioning?

Posts: 53 Threads: 14

Hi all,

I am going to be converting a pair of 1970s 12" and 16" Ludwig concert toms into a rack and floor tom, respectively. This entails installing P1216D mounts to both for the L-arm and legs, following Ludwig's standards at the time. I seek advice on:

1. The distance from the top drum edge to the top hole center for the rack tom mount;

2. The distance from the bottom drum edge to the bottom hole center for the floor tom leg brackets (I found 3 5/8" on another thread on VDF, is this correct?); and

3. The distribution of the floor tom leg brackets along the shell (on same thread I found 3, 6, and 10:30 for an 18" - is this also correct?)

Thanks in advance!

Posted on 5 years ago
#1
Posts: 6287 Threads: 375

I converted a 12 inch 70's Ludwig concert tom for this outfit and found I had to stagger the lugs. The lugs on concert toms are mounted a good deal closer to the center of the drum than 2-headed models.....at least this was the case for me. Pic shows the 12-incher concert converted and a 2-headed 13-incher that came with the outfit.

Thanks

1 attachments
Abalone with 12 005.jpg
119.6 kB
Kevin
Posted on 5 years ago
#2
Posts: 53 Threads: 14

Oh sorry - I wasn't clear; I am keeping them as concert toms, but instead of using the standard clip mounts, I will mount them like a traditional rack and floor tom. So my question is regarding the correct placement of the rack tom's mount, and the floor tom's leg mounts.

By the way - do you happen to still have the bottom trim ring from when you concerted that 12"?

Posted on 5 years ago
#3
Posts: 6287 Threads: 375

Sorry, I don't.

Kevin
Posted on 5 years ago
#4
Posts: 262 Threads: 52

From kevins

I converted a 12 inch 70's Ludwig concert tom for this outfit and found I had to stagger the lugs. The lugs on concert toms are mounted a good deal closer to the center of the drum than 2-headed models.....at least this was the case for me. Pic shows the 12-incher concert converted and a 2-headed 13-incher that came with the outfit.Thanks

I believe that had you used the small lugs you wouldn't have had to stagger them.

Posted on 5 years ago
#5
Posts: 6287 Threads: 375

From frantic freddie

I believe that had you used the small lugs you wouldn't have had to stagger them.

Thanks

Well, it was gifted to me wrapped and drilled, so I went with the stagger option.

Kevin
Posted on 5 years ago
#6
Posts: 262 Threads: 52

From kevins

ThanksWell, it was gifted to me wrapped and drilled, so I went with the stagger option.

That'll teach me to post before my 3rd cup of coffee :D Of course a 12" concert tom would have the large lugs.

Posted on 5 years ago
#7
Posts: 6287 Threads: 375

From frantic freddie

That'll teach me to post before my 3rd cup of coffee :D Of course a 12" concert tom would have the large lugs.

S'all good, brother

I almost butted them right together, but the splay was just too much on the reso side

Kevin
Posted on 5 years ago
#8
  • Share
  • Report
Action Another action
Something else here