Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 145.10230%

Drilling for cracks!

Loading...

Hi i have a couple of cracked cymbals i want to get opinions on about drilling or milling out the crack. Both have been passed down to my son to beat on but the 15 still sound pretty good except for an occasional distortion but not bad overall.

The first is a 15 A crash with a 1" crack that has not moved since i've owned it about 14 years. Should i leave it alone or drill the two ends?

Second a 16" A crash that is just bad (buzzes a lot) but still playable. I thought of milling out the crack but do you think it will improve it enough so my son can get some useable sound out of it.

BTW i was going to do it by hand since i have mad skills with a die grinder due to years of porting and polishing cylinder heads!

Gary.

Sonor teardrops:
12,13,16,20, 14x5 snare
Fibes crystallite-14x5.5 snare
Posted on 15 years ago
#1
Loading...

From gSonor

Hi i have a couple of cracked cymbals i want to get opinions on about drilling or milling out the crack. Both have been passed down to my son to beat on but the 15 still sound pretty good except for an occasional distortion but not bad overall.The first is a 15 A crash with a 1" crack that has not moved since i've owned it about 14 years. Should i leave it alone or drill the two ends?Second a 16" A crash that is just bad (buzzes a lot) but still playable. I thought of milling out the crack but do you think it will improve it enough so my son can get some useable sound out of it. BTW i was going to do it by hand since i have mad skills with a die grinder due to years of porting and polishing cylinder heads!Gary.

Drill the ends on the 15". I would recommend a drill bit 1/8" or less. Do the with the 16". Separate the buzzing edges using a Dremel with a circular cutting tool attachment.

Posted on 15 years ago
#2
Posts: 2628 Threads: 40
Loading...

[COLOR="DarkRed"]Better advice cannot be given than what was said above.

I am assuming the cracks are in the body of the cymbal ? Not edge cracks ????[/COLOR]

www.2ndending.com
Posted on 15 years ago
#3
Loading...

From Drumaholic

Drill the ends on the 15". I would recommend a drill bit 1/8" or less. Do the with the 16". Separate the buzzing edges using a Dremel with a circular cutting tool attachment.

ditto

I did mine 30+ years ago and man I'm glad I did - saved my best Isty's.

Posted on 15 years ago
#4
  • Share
  • Report
Action Another action Something else here