Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 134.47182%

7/16" Eyelets/Grommets for Slingerlands

Posts: 1685 Threads: 529

Greetings,

Does anyone have any that are the short length (3/16") for the thin 3-ply 60's Slingerland shells?

I have a bunch of 3/8" eyelets that are short (3/16") but they are just a little too small for my existing Slingerland holes. I put them in and tighten/crimp them with my eyelet installation tool, and they pop right back out.

I know Jammin' Sam carries threaded 7/16" eyelets, but he will only provide those if you order wrap; they are not available as a stand alone item. Precision carries them too, but they are too long. I asked Precision if they could cut them down for me and they said "no".

The length of all my existing 3/8" eyelets (3/16") is perfect for the shells I have, I just need the eyelet diameter to be a tad bigger, thus I need 7/16" (as oppose to 3/8", or 6/16").

I need 3 of them. Thanks!

V

Posted on 9 years ago
#1
Posts: 5356 Threads: 87

These guys have them. The grommets themselves are not much $4.49 ea. But when I asked about shipping and handling it was like $25. Time is money so the story goes. They might be more reasonable now? Worth a email anyway.

http://www.chicagodrumandrestoration.com/products/slingerlandreproductiongrommets.html

I ended up getting one off ebay for $5 total shipped. I forget who it was from sorry. Was a few years ago.

Slingerland used to use a small washer on some badge installs. I've seen it a few times. Could have been due to the wrong size hole drilled in the shell?

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 9 years ago
#2
Posts: 5295 Threads: 226

I believe My Old Kentucky Drums on ebay has them...Great seller to deal with as well...

Cheers

1976 Ludwig Mach 4 Thermogloss 26-18-14-14sn
1978 Ludwig Stainless 22-22-18-16-14-13-12 c/w 6-8-10-12-13-14-15-16-18-20-22-24 concert toms
1975 Sonor Phonic Centennials Metallic Pewter 22-16-13-12-14sn (D506)
1971 Ludwig Classic Bowling Ball OBP 22-16-14-13
1960's Stewart Peacock Pearl 20-16-12-14sn
1980`s Ludwig Coliseum Piano Black 8x14 snare
1973 Rogers Superten 5x14 & 6.5x14 COS snares
1970`s John Grey Capri Aquamarine Sparkle 5x14 snare
1941 Ludwig & Ludwig Super 8x14 snare
Posted on 9 years ago
#3
Posts: 5295 Threads: 226

Here`s the listing # for MOKD : 281575365846

Cheers

1976 Ludwig Mach 4 Thermogloss 26-18-14-14sn
1978 Ludwig Stainless 22-22-18-16-14-13-12 c/w 6-8-10-12-13-14-15-16-18-20-22-24 concert toms
1975 Sonor Phonic Centennials Metallic Pewter 22-16-13-12-14sn (D506)
1971 Ludwig Classic Bowling Ball OBP 22-16-14-13
1960's Stewart Peacock Pearl 20-16-12-14sn
1980`s Ludwig Coliseum Piano Black 8x14 snare
1973 Rogers Superten 5x14 & 6.5x14 COS snares
1970`s John Grey Capri Aquamarine Sparkle 5x14 snare
1941 Ludwig & Ludwig Super 8x14 snare
Posted on 9 years ago
#4
Posts: 5356 Threads: 87

From grantro

I believe My Old Kentucky Drums on ebay has them...Great seller to deal with as well...Cheers

Yes I found the envelope mine came in. Same seller. I knew I kept it incase I needed to get more someday.

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 9 years ago
#5
Posts: 6363 Threads: 223

From vyacheslav

Greetings,Does anyone have any that are the short length (3/16") for the thin 3-ply 60's Slingerland shells?I have a bunch of 3/8" eyelets that are short (3/16") but they are just a little too small for my existing Slingerland holes. I put them in and tighten/crimp them with my eyelet installation tool, and they pop right back out.I know Jammin' Sam carries threaded 7/16" eyelets, but he will only provide those if you order wrap; they are not available as a stand alone item. Precision carries them too, but they are too long. I asked Precision if they could cut them down for me and they said "no".The length of all my existing 3/8" eyelets (3/16") is perfect for the shells I have, I just need the eyelet diameter to be a tad bigger, thus I need 7/16" (as oppose to 3/8", or 6/16").I need 3 of them. Thanks!V

Yes, Chicago Drum and Restoration has both lengths of these repro grommets. Even better is that their shipping has finally come down! I just inserted my zip code right now and shipping was only $10. That's to the Los Angeles area. They used to charge $25, which was absurd! I guess they got lots of complaints about this and are finally in line with better shipping charges.

Remember, if you go with these grommets, you'll need the proper tool to flare them. Very difficult flaring these aluminum grommets! I've got the tool and will be happy to send it to you. I only ask that you return it!

-Mark

Posted on 9 years ago
#6
  • Share
  • Report
Action Another action
Something else here