I could use one, but 2 if available-[SIZE="5"]just[/SIZE] the rubber foot, it has a thread inside of it. Is on a circa 72 Pearl 22 in BD. Thanks for your time. Dean
Help2
I could use one, but 2 if available-[SIZE="5"]just[/SIZE] the rubber foot, it has a thread inside of it. Is on a circa 72 Pearl 22 in BD. Thanks for your time. Dean
Help2
correction--it's just the rubber boot part-it DOES NOT have threads on the inside. Or make a suggestion for a good replacement part. Thanks.
Years ago I made a couple of those when I could not find any.. Punched a hole through the bottoms of some "hardware store" rubber feet for the spikes to protrude through.
I then rounded out the holes with an old soldering iron.. Worked fine as I generally always used them with the spikes through and in contact with the floor ...
Cheers
John
Great idea, Long John-if I can't find any, I'll give it a whirl. Appreciate your advice very much. Dean
correction--it's just the rubber boot part-it DOES NOT have threads on the inside. Or make a suggestion for a good replacement part. Thanks.
Are you sure?
I have the same, I think, 70's spurs on 2 drums.
Not the best made. Lots of play in the connected tubes after years of use.
I drilled and tapped the connections. Better.
Mine have threaded rubber feet.
see pics
I have to agree with green glass drum on this. Makes no sense that the rubber foot would not be threaded. Is it possible you just have the wrong foot or the insert came out?
Mark
It is not the rubber that is threaded... It is the inner metal insert that is threaded ... the rubber is just is glued around that.. Contact cement holds it on.. So you just need a rubber that fits snugly around the threaded section ( and to make a hole for the spur to protrude)
Cheers
John
It is not the rubber that is threaded... It is the inner metal insert that is threaded ... the rubber is just is glued around that.. Contact cement holds it on.. So you just need a rubber that fits snugly around the threaded section ( and to make a hole for the spur to protrude)CheersJohn
That's what I meant say.
Inner Insert.
Yes the rubber bit can perish, split, and that's usually the last you will see of it... But the hardware store fix does work... The type used on tubular leg bar stools is usually the go..
Cheers
John
Are you sure you want to delete this post?
Are you sure you want to report this thread?