Jeff - use the inserts that fit the lugs... and simply re-tap the inserts (re-cut the threads in the inserts,) to match the thread pitch of the t-rods. Viola! Problem solved...John
What a waste of time to do that.On these M.I.J. inserts re cutting the threads is a hard thing to do one you would have to have the right metric tap.The metal these are made of are poor pot metal or brass.But the hardest thing is to cut the new threads so the T-rod will not pull out of the insert when you go to tighting it......Jeff the T-rod on the far left is a metric odd threaded rod 60's.The one on the far right is a 70's matric threaded rod most likey 5MM.If you are only missing 4 T-rods -{far left}- i have them in stock...Mikey
