Vintage Drum Forum the best vintage drum forum on the Internet - Vintage Drum History - Vintage Drum Questions

Go Back   Vintage Drum Forum > Vintage Non-USA drums

Reply
 
Thread Tools Display Modes
  #1  
Old 07-07-2018, 06:46 PM
memach3 memach3 is offline
Member
 
Join Date: Apr 2014
Posts: 2
Question Coating MIJ drum interiors

I read somewhere that coating the inside of MIJ drums with 2-3 coats of shellac will improve the sound. It makes some sense given that higher end US kits from the 1960s had painted interiors. Has anyone had experience with this technique? Is this a good idea to try on my Whitehall kit?

Thanks for your help
Reply With Quote
  #2  
Old 07-08-2018, 01:11 AM
Trilok_Gurtu Trilok_Gurtu is offline
Senior Member
 
Join Date: Dec 2016
Location: Vancouver, BC, Canada
Posts: 301
Default Re: Coating MIJ drum interiors

Not sure it "improves" the sound, that's subjective. But many who have treated the interiors on vintage MIJ kits say it adds a degree of projection...but overall, doesn't really change the sound. At least, not in an overt way.

It's not a bad idea to treat Luan though. I've used Danish oil, works nicely. Luan get's SO dried out. Plus it can enhance the look. I've known some that have painted the interiors white, like old Ludwig's...no sound difference, just aesthetics. Looks nice though.

Try it out.
Reply With Quote
  #3  
Old 07-08-2018, 03:36 AM
JDragon JDragon is offline
Contributing Member
 
Join Date: Oct 2012
Location: Midwest USA
Posts: 80
Default Re: Coating MIJ drum interiors

I have used a couple coats of satin polyurethane on double headed toms and also several coats of white enamel on single headed toms- no difference really on the poly except maybe 'deeper' sounding- (fuller) and the enamel did enhance projection.The BETTER thing I did was freshen bearing edges = making them clean and consistent- really improved clarity and tone / helped with tuning. (and seals those dry plies!)
Reply With Quote
  #4  
Old 07-08-2018, 08:23 PM
vyacheslav vyacheslav is offline
Vintage Drum Guru
 
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,428
Default Re: Coating MIJ drum interiors

I've done it before on a few kits, mostly just to seal them and make them stronger.

When it comes to drum's sound, 95% of it (IMHO), is tuning and head selection. Also remember how Luan is naturally. Very porus and stringy. You can't argue with science, and science says that the harder and smoother the surface, the more reflective the sound waves will be. Conversely, the softer and rougher the surface, the more absorbed the sound waves will be.

By sealing/laquering the interiors, it certainly makes them smoother and harder, thereby making the sound waves more reflective. On mine, I did notice a small difference in projection and resonance, but not nearly the difference in changing from say a Coated Ambassador top and bottom to a clear Pinstripe top and bottom would have made.
__________________
"The worst thing to happen to drums from the 60's and early 70's was the 80's!"-clubdate64
Reply With Quote
  #5  
Old 07-08-2018, 11:57 PM
memach3 memach3 is offline
Member
 
Join Date: Apr 2014
Posts: 2
Default Re: Coating MIJ drum interiors

Thanks to all for this advice and for providing a better understanding of the Luan wood surface. I appreciate it.
Reply With Quote
  #6  
Old 07-16-2018, 09:01 PM
vibes vibes is offline
Vintage Drum Guru
 
Join Date: Jul 2010
Location: Port St. Lucie, FL.
Posts: 1,503
Send a message via Skype™ to vibes
Default Re: Coating MIJ drum interiors

Not sure about the sound difference, but I treated the wood on my snare with Danish oil. It soaked it up and will harden and preserve the wood. Couldn't hurt. I plan to do it to the rest of my set. 1966 Stewart.
Reply With Quote
Reply

Tags
drum interiors , mij , pearl , whitehall

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2009 VSDwebdesign